Architectural & Structural Drafting · Idaho

Permit-ready drawings, built for Idaho from sheet one.

Idaho-ready architectural plans, structural drawings, and as-builts prepared for snow-load design, frost-depth foundations, seismic coordination, wildfire-interface notes, rural site conditions, and city or county permit submittal standards from the first draft.

  • Fixed quote and firm timeline within one business day
  • Permit-ready designs aligned with Idaho city and county review
  • Snow-load, frost-depth, hillside, and rural-site drafting support
  • Licensed professionals and end-to-end plan review coordination

Get Your Quote

Under 24 Hours!

No obligation. Response within one business day.

Architectural DraftingStructural DrawingsPermit SetsAs-BuiltsWind-Load DetailingHVHZ Documentation3D & BIMRed-Line Revisions Architectural DraftingStructural DrawingsPermit SetsAs-BuiltsWind-Load DetailingHVHZ Documentation3D & BIMRed-Line Revisions
Idaho Services

Every drawing your Idaho project needs

From first sketch to sealed permit set, residential and light commercial drafting across Idaho cities, counties, mountain towns, and rural sites.
A-1

Architectural Drafting

Floor plans, elevations, sections, and construction details for new homes, cabins, additions, remodels, ADUs, barndominiums, and light commercial spaces across Idaho.

S-1

Structural Drawings

Foundation plans, framing plans, roof layouts, connection details, lateral notes, and structural coordination for Idaho snow, frost, seismic, wind, and hillside conditions.

P-1

Permit Sets

Complete construction document packages formatted for Idaho city and county permitting, plan review, and local building department submittals.

E-1

As-Built Drawings

Existing-condition drawings for renovations, additions, cabins, lake homes, rural properties, insurance records, and permit-after-the-fact workflows.

B-1

3D Modeling & BIM

Revit models and 3D visualization to clarify layouts, additions, interiors, mountain homes, shop buildings, and client approvals before permit submission.

R-1

Red-Line Revisions

Fast responses to plan-review comments so Idaho permit corrections move forward without unnecessary delays.

Idaho Compliance

Detailed for Idaho, not adapted to it

Idaho projects require drawings that account for local code review, snow-load requirements, frost-depth foundations, seismic considerations, wind exposure, wildfire-interface areas, hillside lots, lakefront sites, rural access, and county-level submittal expectations. Generic drafting can miss the notes that Idaho reviewers expect to see.
Every Cadgency set is prepared with Idaho permitting in mind. We organize sheets, structural notes, foundation details, site references, and revision responses around local AHJ expectations so residential and light commercial projects are easier to review, revise, and approve.
ID Code

Idaho Code Coordination

Sheet notes, construction details, and drawing organization prepared around Idaho building requirements and city or county review.
Snow

Snow-Load & Roof Detailing

Roof framing, load paths, snow-load notes, drift considerations, and structural coordination for mountain and valley conditions.
Site

Frost, Slope & Rural Sites

Foundation, drainage, hillside, lakefront, rural access, and site-condition notes coordinated for Idaho project locations.
AHJ

Local Review Support

Submittal formatting and red-line responses structured around Boise, Ada County, Coeur d’Alene, Idaho Falls, Twin Falls, and local reviewer comments.
Process

From sketch to stamped in four steps

01

Scope Call

Send sketches, photos, old plans, survey notes, or site information. You get a fixed quote and a firm timeline, usually same day.
02

Draft & Review

We produce the set and walk you through it. Revisions at this stage are included, not billed.
03

Seal & Submit

Where required, drawings are signed and sealed by licensed Idaho engineers or design professionals.
04

Plan Review Support

If your reviewer issues comments, we handle the red-lines until your Idaho permit set is ready to move forward.
COVERAGE MAP · US-50 IDAHO - STATE HIGHLIGHTED
Coverage

Serving every Idaho city and county

Drafting is delivered digitally, with submittal formatting matched to Idaho city, county, mountain, rural, and local building department requirements.
Boise
Meridian
Nampa
Caldwell
Eagle
Kuna
Star
Twin Falls
Idaho Falls
Pocatello
Chubbuck
Rexburg
Coeur d’Alene
Post Falls
Lewiston
Moscow
Sandpoint
McCall
Sun Valley
Ketchum
FAQ

Idaho questions, answered

Many structural scopes, additions, commercial interiors, and permit submittals may require an Idaho-licensed professional depending on project type, location, and local AHJ requirements. Cadgency prepares the drawing set and coordinates sealing when required.

Yes. We prepare Idaho drawings for Boise, Meridian, Coeur d’Alene, Idaho Falls, Twin Falls, Pocatello, Sun Valley, McCall, and rural county projects, including homes, additions, cabins, as-builts, and light commercial permit sets.

Typical residential permit sets run 5 to 10 business days depending on scope, existing information, snow-load or structural requirements, site conditions, and local review standards. As-builts, small additions, and single-sheet revisions are usually faster.

Whatever you have: hand sketches, photos, an old plan set, survey notes, site photos, or just a conversation about what you want to build. We take it from there.

Get Started

Get your drawings quoted today

Send your project details and receive a fixed quote with a firm timeline — usually within one business day. No obligation, no retainer.

Submit your project details, and our team will reply with a quote within 24 hours.